Shimmns-ttu 724

Feedback Feedback

Stage

End of the slider

Article: Shimmns-ttu 724

Bogie flat wagon with four wheelsets, sliding tarpaulin cover and loading cradles for coil/slit strip transport.

The five loading cradles and the tarpaulin cover optimise the transport of moisture-sensitive coils. These tarpaulins can each be pushed together so far that two-thirds of the loading area is exposed for loading and unloading.

Please note: Type is similar to the wagon in the photo. For exact dimensions, please refer to the drawing and the data below.


Technical details

Loading length (mm)

-

Loading width (mm)

2,052

Average tare weight (kg)

22,820

Maximum speed (km/h)

120

International usability

TEN-GE

Smallest radius of curvature (m)

35

First year of delivery or year of construction of the oldest wagons at this time

2009

Parking brake

With and without parking brake

Brake type

KE-GP-A

Number of brake cylinders (pcs.)

1

Brake cylinder diameter (mm)

305

Type of load-proportional braking

Automatic

Buffer type

Category A

Buffer head dimensions (mm)

550 x 340

Automatic coupler

Prepared

Distributor valve type

KE 2dvSL-ALB/d/72/1

Individual data

Draw gear, reinforced (kN)

1,500

Load limits

Average tare weight 22.82 t

With and without parking brake

A

B1

B2

C2

C3

C4

D2

D3

D4

S

37.0 t

37.0 t

49.0 t

54.0 t

57.0 t

57.0 t

54.0 t

63.5 t

67.0 t

120

00.0 t

00.0 t

00.0 t

00.0 t

00.0 t

00.0 t

00.0 t

00.0 t

00.0 t

DB

CM2

CM3/CM4

100

54.0 t

61.0 t


Additional information:

The wagon is equipped for transporting heavy sheet metal coils that need to be protected from the weather with five loading cradles permanently installed in the underframe.

The underframe and the end walls, which are a folded frame construction with sheet metal cladding and U-shaped reinforcement profiles, form the vehicle body. The saddle-shaped cross bearers, each welded to the side solebar, form the loading cradles together with the cradle plates.

The wagon is covered with a PVC-coated fabric tarpaulin, which rests on 11 tubular frames. The tarpaulin roof can be moved in the longitudinal direction of the wagon by means of carriages.

The tarpaulin roof is locked to the end walls by means of a four-point central locking system that can be operated both from the ground and from the ramp. The tarpaulin roof can be pushed together at one end of the wagon to such an extent that approximately two-thirds of the loading area is exposed for loading. Auxiliary bows are arranged between the roof bows in such a way that collapse of the tarpaulin is reduced by half when it is pushed together, in order to ensure the necessary clearance for larger coil diameters. The wagon may only be operated with the tarpaulin roof closed and locked.

The wagons are equipped with 20 steplessly adjustable holding arms (four per cradle), which are mounted on the cradle humps and supported by rollers in the cradles. Their shape and strength are designed to ensure reliable protection against unacceptable lateral shifts as well as against tilting of tied narrow strip coils.

In contrast to earlier types of load fastening devices (e.g. Shimmns-tu 718), the individual arms can be moved into place, with fine adjustments made using screws. This allows the arms to be brought up to contact with the coils. For this purpose, the screws are driven by hand wheels arranged laterally on the cradle saddles or by suitable machines.

The lining of the loading cradles with a rubber support is intended to help provide optimum protection of the coil sheet, which is also achieved by a special loading cradle design.

Loading instructions and diagrams are displayed on pictograms inside the wagon.

Feedback Feedback