Remms 665
Bogie flat wagon with four wheelsets, with drop sides, drop ends and stanchions.
With a loading length of 12.80 m, these wagons are used for transporting heavy, long products from the iron and steel industry.
Please note: Type is similar to the wagon in the photo. For exact dimensions, please refer to the drawing and the data below.
Technical details
Loading length (mm) | 12,644 |
Loading width (mm) | 2,780 |
Loading area (m2) | 35 (flattened at the top) |
Average tare weight (kg) | 21,450 |
Maximum speed (km/h) | 120 |
International usability | RIV |
Harmonisation/standardisation | UIC St |
Smallest radius of curvature (m) | 35 |
First year of delivery or year of construction of the oldest wagons at this time | 1976 |
Parking brake | Without parking brake |
Brake type | KE-GP |
Number of brake cylinders (pcs.) | 1 |
Brake cylinder diameter (mm) | 406 |
Type of load-proportional braking | Two-stage, mechanical, to be changed over manually |
Buffer type: end force (kN) | 590 |
Buffer type: stroke (mm) | 105 |
Buffer head dimensions (mm) | Avg 450 (flattened at the top) |
Automatic coupler | Prepared |
Distributor valve type | KE 1adSL |
Individual data
Height of bolster above top of floor (mm) | 70 |
Load limits
Tare weight > 21.0 t ≤ 21.5 t
Without parking brake
A | B1 | B2 | C | ||
|---|---|---|---|---|---|
S | 42.5 t | 48.5 t | 50.5 t | 58.5 t | |
120 |
Concentrated loads
m | Spread over the support length | On two baseplates | |
|---|---|---|---|
a-a | 2 | 35.0 | 40.0 |
b-b | 3 | 37.0 | 47.0 |
c-c | 5 | 43.0 | 56.0 |
d-d | 9 | 58.0 | 58.5 |
e-e | 12 | 58.5 | 24.0 |
Additional information:
With the bolsters folded in, i.e. with a level loading area, it is also suitable for transporting heavy tracked vehicles. Two lowerable stanchions are positioned in front of each of the folding drop ends. The wagon can be driven with the drop ends folded down and the stanchions lowered. The height of the folded-down drop ends above top of floor is 38 mm. There are six swivel stanchions on each long side of the wagon and a total of 12 lowerable lashing devices in the floor. With the drop sides folded down, the wagon can only be transported with an infringement of the loading gauge. The floor is made of pine planks measuring 70 x 180 mm. It can take a wheel load of 5.0 t. There are six split, folding bolsters built into the floor.
All data provided without any guarantee of correctness or completeness.
Go