Article: Hbbills 308
Freight wagon with two wheelsets, two-part aluminium sliding walls, six lockable partitions and thermal insulation.
This high-capacity wagon is equipped with sliding walls that can be moved by a single person. When open, the entire wagon loading area can be accessed from both sides.
This allows the wagon to be loaded and unloaded using forklift trucks either from a platform or from ground level. This wagon is fitted with "lockable partition" transport guards that enable different kinds of highly sensitive goods to be properly protected when being transported. The transport guards allow the interior of the wagon to be divided up into individual compartments. The loading area and loading space are reduced proportionally to the size of the built-in transport guard. The lockable partitions engage with rows of holes set into the wagon floor and on the top chord.
Please note: Type is similar to the wagon in the photo. For exact dimensions, please refer to the drawing and the data below.
Technical details
Loading width (mm) | 2,900 |
Loading height (mm) | 2,400 |
Loading area (m2) | 41.0 |
Average tare weight (kg) | 17,210 |
Maximum speed (km/h) | 120 |
International usability | RIV |
Harmonisation/standardisation | UIC |
Smallest radius of curvature (m) | 35 |
First year of delivery or year of construction of the oldest wagons at this time | 1984 |
Parking brake | With and without parking brake |
Brake type | KE-GP |
Number of brake cylinders (pcs.) | 1 |
Brake cylinder diameter (mm) | 300 |
Type of load-proportional braking | Two-stage, mechanical, to be changed over manually |
Buffer type: end force (kN) | 590 |
Buffer type: stroke (mm) | 105 |
Buffer head dimensions (mm) | 450 x 340 |
Automatic coupler | Prepared |
Distributor valve type | KE 2adSL-D |
Individual data
Side wall openings: width (mm) | 7,018 |
Side wall openings: height (mm) | 2,600 |
Running gear as per drawing | 1Fwg305.1.02.000.001 |
Parabolic springs: stretched length (mm) | 1,200 |
Parabolic springs: number of spring leaves | 4 + 1 |
Parabolic springs: spring leaf width (mm) | 120 |
Parabolic springs: spring height (mm) | 202 |
Loading length without partitions (mm) | 14,076 |
Loading length with partitions (mm) | 13,500 |
Loading space to bottom edge of wagon body top chord (m3) | 105.0 |
Loading space up to upper edge of transport guard (m3) | 98.5 |
Clear ceiling height up to the first slope inward of sliding wall (mm) | 2,120 |
Load limits
Average tare weight 17.2 t
With and without parking brake
A | B | C | D | ||
|---|---|---|---|---|---|
S | 14.5 t | 18.5 t | 23.5 t | 27.5 t | |
120 |
DB | CM |
|---|---|
100 | 24.5 t |
Additional information:
- This wagon is a Hbbillns 305 vehicle retrofitted with loading space insulation.
- It is fitted with six "lockable partition" transport guards. The loading space is completely insulated with rigid polyurethane foam and polystyrene.
- The end walls are covered with plywood boards to protect the insulation. The sliding walls have partial seals to reinforce the insulating effect.
- The wagon is intended for transporting palletised or other part loads that are sensitive to cold, such as chemical products or foods.
All data provided without any guarantee of correctness or completeness.
Go